Changes between Version 25 and Version 26 of switches
- Timestamp:
- 02/14/06 19:59:28 (21 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
switches
v25 v26 67 67 Fortunately, the switch continues to pass regular traffic in this situation. However, plugging a computer into a previously-unused port on the switch once it is in this moribund state leaves the new machine unable to acquire a DHCP address. Haven't tried using a statically-configured IP address on such a dead port yet. perhaps the switch's internal arp cache is no longer being updated? 68 68 69 Note on 'v2': the 24-port switch is a GS724Tv2 - you can only find out about the v2 if you look at the label at the bottom of the switch - it's not printed on the front plate! The version of firmware it's running is V1.0.0_0429. This is not even mentioned in the page for [http://kbserver.netgear.com/products/gs724tv2.asp updates on this switch] - rather, they list V1.01. And yet, the switches seem to be working... so, we have no present needto update to latest firmware!69 Note on 'v2': the 24-port switches are GS724Tv2 - you can only find out about the v2 if you look at the label at the bottom of the switches - it's not printed on the front plates! The version of firmware is V1.0.0_0429. This is not even mentioned in the page for [http://kbserver.netgear.com/products/gs724tv2.asp updates on this switch] - rather, they list V1.01. And yet, the switches seem to be working... so, we have no present need (or desire) to update to latest firmware! 70 70 71 71 In addition to the above 6 switches, there is an ancient 10Mbit Cisco switch (with one 10/100 uplink port) installed in the utility closet on the 13th floor. Its IP is 128.59.168.35. Only a few of its ports have traffic, as follow: 13 (room 1322); 14 (room 1022); 15 (room 1329); 17 (room 1016); 18 (room 1018). This switch uplinks to the 12th floor switch at half-duplex 100Mbit via a green cable.
