Changes between Version 5 and Version 6 of mars

Timestamp:

01/09/07 17:44:29 (20 years ago)

Author:

dkg@…

Comment:

--

mars

@@ -26 +26 @@
 there are [http://www.lavalink.com/index.php?id=471 linux configuration instructions online]
 
-as it turned out, to properly configure the device, i needed to install the `setserial` package, tell debconf to configure it manually, and then create an /etc/serial.conf that looks like this:
+as it turned out, to properly configure the device, i needed to install the `setserial` package, tell debconf to configure it manually, and then create an /var/lib/setserial/autoserial.conf that looks like this:
 
 {{{
@@ -35 +35 @@
 /dev/ttyS2 uart none port 0x8000 irq 169 baud_base 115200 spd_normal skip_test
 /dev/ttyS3 uart none port 0x8400 irq 169 baud_base 115200 spd_normal skip_test
+/dev/ttyS4 uart none port 0x8000 irq 169 baud_base 115200 spd_normal skip_test
+/dev/ttyS5 uart none port 0x8400 irq 169 baud_base 115200 spd_normal skip_test
+/dev/ttyS6 uart none port 0x8000 irq 169 baud_base 115200 spd_normal skip_test
+/dev/ttyS7 uart none port 0x8400 irq 169 baud_base 115200 spd_normal skip_test
+/dev/ttyS8 uart none port 0x8000 irq 169 baud_base 115200 spd_normal skip_test
+/dev/ttyS9 uart none port 0x8400 irq 169 baud_base 115200 spd_normal skip_test
 
 # now we configure them all: