| Version 8 (modified by , 20 years ago) ( diff ) |
|---|
beetle.astro.columbia.edu
beetle is an HP P3005dn black and white laserjet.
it offers printing to machines on the Pupin subnet, via HP's jetdirect protocol, over port 9100.
It can be configured via https. Its TLS certificate should be signed by the CAL Certificate Authority.
configuration choices and rationales
We are offering only one flavor of print service, to minimize potential interactions between queueing clients on the jetdirect server. dkg chose jetdirect because that seems to offer the most features for printing. However, it's possible that IPP will provide a more stable environment, so i might pursue that instead, if we continue seeing the problems.
We've been testing by printing a two-page blank PDF file, and running 50 or 100 prints in a row of it from evince.
I've also turned off every other service i could possibly find. !mDNS, RCFG, IPX/SPX, AppleTalk, SNMP, etc. All are off. Only ipp and https configurations are enabled.
problems
After setting up the printer on the network, we have experienced a series of problems. We seem to be seeing the same problems with the shipped firmware (20060608 02.034, i think), and with a new firmware upgrade (from here), which brings the firmware version to 20061031 02.037.0
The firmware upgrade was done by "printing" an rfu file, as suggested in the readme.
hanging during duplex
one problem we've seen so far is that a job can sometimes hang in the middle of a duplex, while displaying "duplexing; do not grab paper" on the display. The only way we've found around that is to physically restart the printer (with the power switch).
Other times, the printer reports unhelpful coded error messages, which also require a power restart. Error messages we've gotten so far are:
- 49.23A1 (appears to be a crash while doing 9100 printing)
- 49.2F9D (appears to be a crash while doing IPP printing)
error message rundowns can be found here, and apparently 49.XXX means:
A critical firmware error has occurred. * Turn the device off and then on. * If the message persists, contact HP Support.
I just tried calling them, and was told that their office was closed. I will try again later.
