Context Navigation

SourceSection

v23	v24
46	46	intact when it is put into the system. Go to the blue-grey box under the bender and open it.
47	47	Be careful, there is electric equipment everyhwere, shut off all close by electic equipment, the turbo and rough pump
48		are ok to leave on.Inside is the cooling system for the source. Using a pan, drain the water out of the system from the bottom of the PVC tube.
	48	are ok to leave on.Inside is the cooling system for the source. Using a pan, drain the water out of the system from the bottom of the PVC tube. Make sure that you disconnect the water circuit that feeds water through the ion source and not the water coming from the chiller in the other room.
49	49	There is a clear plastic cylindrical filter holder, unscrew the outside cap carefully so to not spill the water in it
50	50	on top of the motor that pumps the water through the cooling lines. The old filter bag is sitting in this piece in a