Context Navigation

SourceSection

v21	v22
33	33	resistance, then it is time to make a new filament. The filment re-dipping should be done in a well ventilated area due to the fumes from the dip.
34	34	The filament will simply be briefly put into the coating dip, then heated with a heat gun to dry. This should be repeated about 3 times.
35		After the filament has dried it can be put back into the source. The source will take some time until it is able to get back to typical base pressures of order of
	35	After the filament has dried it can be put back into the source. The source will take some time (about 12 hours) until it is able to get back to typical base pressures of order of
36	36	10^-7^ Torr.
37	37	[[br]]